Orion 12v-12v 30 AMP

Description Orion 12v-12v 30 AMP Technical Specifications Input Characteristics Input Voltage Range 12V models: 8-17V nominal input voltage 24V models: 16-35V nominal input voltage 48V models: 32-70V nominal input voltage Under-Voltage Protection 12V models: 7V shutdown, 7.5V restart 24V models: 14V shutdown, 15V restart 48V models: 28V shutdown, 30V restart No-Load Input Current 250-280W models: < 80mA 360-400W models: < 80mA standby consumption Output Specifications Nominal Output Voltage 12V output models: 12.2V nominal 24V output models: 24.2V nominal 48V output models: 48.2V nominal Output Voltage Adjust Range 12V models: 10-15V adjustable setpoint 24V models: 20-30V adjustable setpoint 48V models: 40-60V adjustable setpoint Output Voltage Tolerance: /- 0.2V regulation accuracy Output Noise: 2 mV RMS ripple voltage Continuous Output Current at 25°C 12/12-18: 18A (216W) 12/12-30: 30A (360W) 12/24-10: 10A (240W) 24/12-20: 20A (240W) 24/24-12: 12A (288W) 48/12-20: 20A (240W) 48/24-16: 16A (384W) 48/48-8: 8A (384W) Maximum Output Current at 20% Reduced Voltage 12/12-18: 25A peak 12/12-30: 40A peak 12/24-10: 15A peak 24/12-20: 25A peak Short-Circuit Output Current 12/12-18: 40A maximum 12/12-30: 60A maximum 24/12-20: 50A maximum Performance Characteristics Conversion Efficiency 250-280W models: 87-88% typical efficiency 360-400W models: 87-89% typical efficiency at nominal load Continuous Output Power at 25°C 12/12-18: 280W 12/12-30: 430W 12/24-10: 280W 24/12-20: 300W 48/12-20: 280W Continuous Output Power at 40°C 12/12-18: 220W derated 12/12-30: 360W derated 12/24-10: 240W derated 24/12-20: 240W derated Charging Algorithm Charge Stages: Bulk – Absorption – Float (3-stage adaptive algorithm) Bulk Phase: Constant current delivery until absorption voltage reached Absorption Time: Lead-acid: 2 hours default, automatically extended after deep discharge Lithium: Fixed duration configurable Float Voltage: Reduced maintenance voltage for long-term connection Alternative Mode: Fixed output voltage (configurable, bypasses multi-stage algorithm) Isolation and Protection Galvanic Isolation: 200 VDC between input, output, and chassis Protection Rating: IP43 (solid objects > 1mm, water spray up to 60° from vertical) Thermal Protection: High-temperature current derating prevents overheating Short-Circuit Protection: Automatic current limiting during fault conditions Reverse Polarity Protection: Input fuse (non-replaceable) protects against reverse connection Control and Connectivity Bluetooth: Integrated Bluetooth Low Energy for wireless configuration VictronConnect App: iOS and Android mobile application for monitoring and parameter adjustment Remote On/Off: Two-pole connector accepts switch or relay contact Alternative Control: H-terminal enables battery plus or chassis-switched operation GX Device Compatible: Integration with Victron GX devices for VRM portal access Power Supply Mode: Output voltage user-settable via Bluetooth Environmental Specifications Operating Temperature Range: -20°C to 55°C (derate 3% per °C above 40°C) Humidity: Maximum 95% non-condensing Altitude: Performance maintained up to 2000m above sea level Physical Specifications Connection Type: Screw terminals (no special tools required) Maximum Cable Cross-Section: 16mm² (AWG6) Dimensions (H × W × D) 250-280W models: 130 × 186 × 70mm (5.1 × 7.3 × 2.8 inches) 12V input/output 360-400W models: 130 × 186 × 80mm (5.1 × 7.3 × 3.2 inches) Other 360-400W models: 130 × 186 × 70mm (5.1 × 7.3 × 2.8 inches) Weight 250-280W models: 1.3kg (3 lb) 12V input/output 360W models: 1.8kg (4 lb) Other 360W models: 1.6kg (3.5 lb) Compliance Standards Safety Standards: EN 60950 Emission/Immunity: EN 61000-6-3, EN 55014-1 / EN 61000-6-2, EN 61000-6-1, EN 55014-2 Automotive Directive: ECE R10-5 Protection Category: IP43 (electronic components), IP22 (connection area)